Boards for Floors

Boards for Floors


Description of the product

Gypsum fibre boards for dry screed floor


Thickness /mm/ 10 12,5
Width /mm/ 1000 1000
Lengh /mm/ 1500 1500
Edge /mm/ SK SK


Gypsum fibre boards should be stored in horizontal position on wooden pallets or strips of boards in dry, moisture-protected rooms.

Cutting out

The gypsum fibre boards with a thickness of up to 12.5 mm are cut with a scraper blade and bent over the edge of the rack. The broken edge can be aligned with a front grate and cleaned from dust (especially when applied with an open or glued joint). Clean edges can be achieved with an electric saw (use aspiration).


Gypsum fibre boards are fixed to metal frame by means of screws and to timber frame by means of screws, nails or staples (DIN 1052), galvanized or with another
anti-corrosion coating.



Knauf Gypsum Fiber Board Brochure-en
Technical brochure-F13
Knauf Gipsfaser Vidifloor_Declaration of Performance
Environmental Product Declaration
Safety Data Sheet

Systems with Vidifloor