Vidifloor SOLO
Boards for Floors

Boards for Floors

Vidifloor SOLO

Vidifloor SOLO

Description of the product

Gypsum fibre board for floors as a single-layer dry screed.


Vidifloor SOLO
Thickness /mm/ 18  
Width /mm/ 600 (635)  
Lengh /mm/ 900 (935) 1200 (1235)
Edge /mm/ Stepped rebate  


Gypsum fibre boards should be stored in horizontal position on wooden pallets or strips of boards in dry, moisture-protected rooms.

Cutting out

The gypsum fibre boards with a thickness of up to 12.5 mm are cut with a scraper blade and bent over the edge of the rack. The broken edge can be aligned with a front grate and cleaned from dust (especially when applied with an open or glued joint). Clean edges can be achieved with an electric saw (use aspiration).


Gypsum fibre boards are fixed to metal frame by means of screws and to timber frame by means of screws, nails or staples (DIN 1052), galvanized or with another
anti-corrosion coating.



Knauf Gypsum Fibre Board Brochure
Technical Brochure-F13
Technical datasheet-K824
Safety Data Sheet
Environmental Product Declaration
CE-Vidifloor SOLO
Declaration of Performance

Systems with Vidifloor SOLO